Description:
Surface finish:
A consisting of:
- 08550 drilling jig DIN 6348
- 08710 V-Block with stop
- 08641 locating plate
- 08640 Index drilling disc with 16 accessible drill-bush diameters, see table. Intermediate dimensions can be partially achieved by means of removable drilling bushes DIN 173.
B consisting of:
- 08550 drilling jig DIN 6348
- 08710 V-Block with stop
- 08641 locating plate (this may be omitted in the case of Size 2, but then the max. clamping width is reduced by 30 mm)
- 08650 drill-bush support plate with 4 drill-bush supports Size 5-8, Ø 8, Ø 10, Ø 12 und Ø 15. Intermediate dimensions can be achieved in each case using removable drill bushes DIN 173. See table for drill-bush supports of your choice sizes 1 to 4. All drill-bush supports can be used for size 0 and size 2 supports.
Sample order:
nlm 08630-12
Note:
Rotary drilling jigs are eparticularly rational for producing cross holes in rotating parts. The drilling jig DIN 6348 Size 0 and 2 is used as the basic component.
A v-block with adjustable stop, having mini-divisions and vernier is used instead of the standard locating plate. The index drilling discs or drill-bish supports are mounted on the columns. Set-up is very easy and can be done without any technical knowledge.
All parts can be individually supplied later: they are manufactured true to gauge size. This enables finishes A and B to be interchangeable. A clamped part can have holes drilled, countersunk, milled or have threads cut in it using plug-in bushes..